News
How can you tell high-quality chenille fabric apart?
Inquire about “low-pilling modified polyester” or “solution-dyed acrylic fiber”; both meet or exceed 15,000 Martindale abrasion cycles under the Grade 4 standard.
2025-09-08
Are suede fabrics prone to pilling?
Structure: The pile yarn is wrapped around the core yarn, leaving numerous free fiber ends; friction pulls these ends out, causing them to tangle and form a clump.
2025-09-08
How do you remove stubborn stains from faux mink velvet fabric?
Pre-cleaning: Use the cool-air setting on a hair dryer to blow away surface dust, then gently brush in the direction of the pile with a soft faux mink-bristle brush to prevent dirt from being pushed down to the base.
2025-09-08
Can faux mink clothing be ironed?
Temperature: Set the iron to the “polyester” setting (≤ 120°C); above 130°C, micro-polyester will begin to melt and leave permanent shiny spots.
2025-09-08
The differing stitch densities on the front and back sides of the irregular ribs, combined with the shrinkage of spandex, generate an imbalance torque exceeding 0.6 N·m at the fabric edge.
2025-09-08
最常见的原因是废纱缠绕在送料轮上或皮带打滑。停止操作，使用0.1克的张力计测量每个送料器；如果张力超过0.3 cN，重新穿线并清理缠绕物。
2025-09-08
Can gray velvet be treated with a flame-retardant finish? Will such treatment cause it to yellow?
Replace disperse/black or vat/grey dyeing with a cold-reactive dyeing mixture: Reactive Black RGB + Reactive Neutral Grey H-EX.
2025-09-08
Velvet fabrics are prone to static electricity. Are there any simple solutions?
During the final rinse, add 10 grams of fabric softener (or 5 grams of white vinegar), let the garments soak for 3 minutes, then spin-dry. This forms a monomolecular hydrophilic film, reducing surface resistance by two orders of magnitude; after 3–5 wears, no “cracking” phenomenon occurs.
2025-09-08
Address
5th Floor, Hangzhou Tangchi Plastic Film Technology, No. 6 Yuanliu Road, Shanbei Village, Guali Town, Xiaoshan District, Hangzhou, Zhejiang Province, China